FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 26)

C
Make a note of the Paper Level from Paper Setup from Printer.
Removing the Spindle Unit
c Important:
When the light is lit and paper is ejected from the eject slot, there is no remaining paper. Pull out the paper from the
eject slot.
A
Check that the printer's light is on.
If the light is flashing, the printer is operating. Wait until all operations have stopped.
c Important:
Make sure the power is on before replacing paper.
Frontier-S Operation Guide
Replacing Paper
26