FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 73)

Code Message What to do
W-2402 Maintenance cartridge usage exceeded the application limit.
Delete all print jobs remaining in the operating system's print
queue.
Replace the maintenance cartridge.
After deleting all of the print jobs, replace
the maintenance cartridge.
U “Replacing the Maintenance Cartridge”
on page 53
W-2201
W-2204
Ink cartridge error
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Please install correct cartridge.
After deleting all of the print jobs, check the
color of the ink cartridge displayed in xxxx,
and then replace the cartridge.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2202 Replace Cartridge
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Please install correct cartridge.
After deleting all of the print jobs, check the
color of the ink cartridge displayed in xxxx,
and then replace the cartridge.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2203 Ink cartridge error
(xxxx)
Delete all print jobs remaining in the operating system's print
queue.
Remove and reinstall them correctly or replace them.
After deleting all of the print jobs, check the
color of the ink cartridge displayed in xxxx,
and then replace the cartridge or install it
correctly.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2205 Insufficient ink left to perform head cleaning or initial charge.
Replace the ink cartridge indicated by the ink light that is
turned on.
Delete all print jobs remaining in the operating system's print
queue.
The cartridge being used can be installed again for printing.
Replace the ink cartridge for which the ink
light is on, and then delete all print jobs.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2403 Maintenance cartridge cannot be recognized
Delete all print jobs remaining in the operating system's print
queue.
Install the maintenance cartridge correctly.
After deleting all of the print jobs, replace
the maintenance cartridge or install it
correctly.
If a message is displayed, check the details.
U “Replacing the Maintenance Cartridge”
on page 53
W-2404 Insufficient free space in the maintenance cartridge.
Delete all print jobs remaining in the operating system's print
queue.
Replace the maintenance cartridge, and then perform head
cleaning or initial charge.
After deleting all of the print jobs, replace
the maintenance cartridge.
If a message is displayed, check the details.
U “Replacing the Maintenance Cartridge”
on page 53
E-5101 The printer is disconnected.
Delete all print jobs remaining in the operating system's print
queue.
Check that the cable is connected, and then turn the printer
back on.
Contact service support if the error continues to occur.
After deleting all of the print jobs, check that
the cables are connected correctly, and then
restart the printer.
If the error persists, contact service support.
Frontier-S Operation Guide
Troubleshooting
73