FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 68)

Code Message What to do
W-1105 Paper is out.
Load paper.
Check that there is no paper inside the
printer, and then reload the paper. If a
message is displayed, check the details.
U “Replacing Paper” on page 23 W-1106 Paper is out or not loaded correctly.
Load paper.
W-1108 The width of the loaded paper is not supported.
Load supported paper.
Load the appropriate paper.
U “Replacing Paper” on page 23
W-1109 Cannot recognize the paper type.
Update the paper information.
Update the paper information. See the
"Maintenance Tool Operation Guide" for
more details on updating the information.
W-2401 Maintenance cartridge not installed
Install the maintenance cartridge.
Reinstall the maintenance cartridge
correctly.
U “Replacing the Maintenance Cartridge”
on page 53
W-2402 Maintenance cartridge usage exceeded the application limit.
Replace the maintenance cartridge.
Replace the maintenance cartridge.
U “Replacing the Maintenance Cartridge”
on page 53
W-2201 Ink cartridge error
(xxxx)
Please install correct cartridge.
Check the color of the ink cartridge
displayed in xxxx, and then replace the
cartridge.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2202 Replace Cartridge
(xxxx)
Check the color of the ink cartridge
displayed in xxxx, and then replace the
cartridge.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2203 Ink cartridge error
(xxxx)
Remove and reinstall them correctly or replace them.
Check the color of the ink cartridge
displayed in xxxx, and then replace the
cartridge or install it correctly.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2204 Ink cartridge error
(xxxx)
Please install correct cartridge.
Check the color of the ink cartridge
displayed in xxxx, and then replace the
cartridge.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
W-2205 Insufficient ink left to perform head cleaning or initial charge.
Replace the ink cartridge indicated by the ink light that is
turned on.
The cartridge being used can be installed again for printing.
Replace the ink cartridge for which the ink
light is on.
If a message is displayed, check the details.
U “Replacing Ink Cartridges” on page 45
Frontier-S Operation Guide
Troubleshooting
68