FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 19)

❏
Do not throw away the paper packaging as you can use it for storing the paper.
❏
Do not use paper that is wrinkled, scuffed, torn, or dirty.
Notes on storage
Before and after opening the paper, store it in an environment that is not subject to direct sunlight and meets the
following conditions. If paper is not being used after it has been opened, remove it from the spindle unit and wind it up
before storing.
Storage area
Storage environment
Humidity Temperature
Original packaging (store in the original packaging)
20 to 80 % 15 to 25 °C
Paper Case (optional)
c Important:
Do not wet the paper.
Notes on printing
Make sure that the leading edge of the paper is perpendicular to the long side and cut completely straight.
Storing and displaying print outs
❏
Make sure you do not rub or scratch the printed side.
❏
Avoid locations that are subject to high temperature, humidity, and direct sunlight, and store in a dark place.
❏
Avoid displaying print outs outdoors or in direct sunlight. This may accelerate the fading.
❏
When displaying print outs indoors, we recommend placing them in glass frames and so on. This allows you to
display your print outs for a long time without them fading.
Notes on Ink Cartridges
❏
If you move the ink cartridges from a cold place to a warm place, leave them at room temperature for more than
four hours before use.
❏
We recommend that ink cartridges be stored in a cool location and used before the expiry date printed on the
packaging. Also, the ink cartridges should be used within six months of opening.
❏
Do not touch the ink supply port on the ink cartridge or its surrounding area. Ink may leak from it.
❏
The ink level and other data are stored in the IC chip, allowing ink cartridges to be used after being removed and
replaced.
❏
To avoid getting dirt on the ink supply port, store the removed ink cartridge properly. The ink supply port has a
valve in it so it does not need to be capped.
Frontier-S Operation Guide
Introduction
19