FujiFilm X-H2 Mirrorless Camera - Manual (Page 342)

318
P
eripherals and Optional
A
c
c
essories
11
Flash Settings
1 Connect the unit to the camera.
2 In shooting mode, select FLASH
FUNCTION SETTING in the F ( FLASH
SETTING ) menu tab. The options
available vary with the fl ash unit.
FLASH SETTING
RED EYE REMOVAL
TTL-LOCK MODE
FLASH FUNCTION SETTING
LED LIGHT SETTING
COMMANDER SETTING
CH SETTING
EXIT
Menu Menu Description Description P P
EF-X8
Displayed when an optional EF-X8 fl ash unit is mounted
on the hot shoe and raised.
319
SYNC
TERMINAL
Adjust settings for fl ash units connected via the sync
terminal.
SYNC TERMINAL is displayed if the EF-X8 is
lowered and either no fl ash unit, or an incompatible fl ash
unit, is mounted on the hot shoe.
321
SHOE MOUNT
FLASH
Displayed when an optional fl ash unit other than the
EF-X8 is mounted on the hot shoe and turned on.
322
COMMANDER
(OPTICAL)
Displayed if an optional fl ash unit functioning as a com-
mander for Fujifi lm optical wireless remote fl ash control is
connected and turned on.
325
3 Highlight items using the focus stick
(focus lever) and rotate the rear com-
mand dial to change the highlighted
setting.
EF-X8
MODE
END ADJUST
4 Press DISP/BACK to put the changes into eff ect.