FujiFilm X-H2 Mirrorless Camera - Manual (Page 68)

44
2
F
irst St
eps
Using Two Cards
The camera can be used with two cards, one in each of its two
slots. At default settings, photos are saved to the card in the sec-
ond slot only when the card in the fi rst slot is full. This can be
changed using
D SAVE DATA SET-UP > x CARD SLOT SETTING .
Option Option Description Description Display Display
SEQUENTIAL
(default)
The card in the second slot is used only when the card in
the fi rst slot is full. If the second slot is selected for
D SAVE
DATA SET-UP > SELECT SLOT( x SEQUENTIAL) ,
recording will start on the card in the second slot and
switch to the fi rst slot when the card in the second slot
is full.
BACKUP Each picture is recorded twice, once to each card.
SEPARATE
RAW pictures are recorded to the card in the fi rst slot
and JPEG or HEIF pictures to the card in the second slot.
This setting takes eff ect only when
FINE + RAW or
NORMAL + RAW is selected for H IMAGE QUALITY
SETTING > IMAGE QUALITY .
RAW+JPEG
RAW+HEIF
The card used to store movies can be selected using B MOVIE
SETTING > MEDIA REC SETTING .