Hearth and Home Technologies EPA Certified Woodburning Fireplace 7100FP-GD-B - Manual (Page 5)

September 1, 2008
433-1390G Page 5
7100FP EPA Woodburning Fireplace
R
Improper installation, adjustment, alteration, ser-
vice or maintenance can cause injury or property
damage. Refer to the owner’s information manual
provided with this fireplace. For assistance or addi-
tional information consult a qualified installer, service
agency or your dealer.
WARNING
C. Glass Specifications
D. BTU & Efficiency Specifications
This fireplace is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass.
Hearth & Home Technologies disclaims any responsibility
for, and the warranty and agency listing will be voided by
the above actions.
Fire Risk
• Do not install or operate damaged fireplace.
• Do not modify fireplace.
• Installation other than as instructed by Hearth &
Home Technologies Inc. is strictly prohibited.
• Do not operate the fireplace without fully assembling
all components.
• Do not overfire.
• Do not install an unvented gas log set. This
fireplace has not been tested for use with unvented
gas log sets.
• Installation and/or use of any component part not
approved by Hearth & Home Technologies.
WARNING
NOTE: Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
EPA # and Original Date: #571 4-1-03
EPA Certified: 3.1 grams per hour
Efficiency: up to 77%
BTU Output
with EPA test fuel:
with cord wood:
58,500/ hr.
90,000/hr
Heating Capacity: up to 3,500 sq ft
Vent Size: 8 inches
Max Wood Length: 24 inches
Fuel: Cord Wood
Shipping Weight: 570 lbs