HP 2910AL - Manual (Page 267)

Power Over Ethernet (PoE+) Operation
PoE with LLDP
Syntax: show lldp info local-device <port-list>
Displays detailed information about local PoE devices.
ProCurve(config)# show lldp info local-device 1
LLDP Local Port Information Detail
Port : 1
PortType : local
PortId : 1
PortDesc : 1
Poe Plus Information Detail
Poe Device Type : Type2 PSE
Power Source
: Primary
Requested Power Value : 15 Watts
Actual Power Value : 15 Watts
Acknowledgement : Not part of ack/nack cycle
Lost Communication
: 0
Figure 11-5. Example of LLDP Local Device Information
Displaying Remote Power Information
To view information about remote PoE devices and power usage, use this
command.
Syntax: show lldp info remote-device <port-list>
Displays detailed information about remote PoE devices.
11-17