HP 2910AL User Manual
Page 482
Advertising
Monitoring and Analyzing Switch Operation
Interface Monitoring Features
Move the cursor to the Monitoring Port
Inbound Port and Trunk Monitoring (Only) on the Switch 4108
Figure B-20. How To Select a Monitoring Port
5. Use the Space bar to select the port to use for monitoring.
6. Highlight the Monitor field and use the Space bar to select the interfaces
to monitor:
Ports: Use for monitoring ports or static trunks.
VLAN: Use for monitoring a VLAN.
7. Do one of the following:
•
If you are monitoring ports or static trunks go to step 8.
•
If you are monitoring a VLAN:
i.
Press
[Tab]
or the down arrow key to move to the
VLAN field.
Use the Space bar to
select a VLAN to monitor.
B-26
Advertising