HP 2910AL - Manual (Page 519)

Troubleshooting
Using the Event Log for Troubleshooting Switch Problems
mld Multicast Listener Discovery (MLD): IPv6 protocol used by a
router to discover the presence of multicast listeners. MLD
can also optimize IPv6 multicast traffic flow with the snooping
feature. Multicast and Routing Guide
mtm Multicast Traffic Manager (MTM): Controls and coordinates
L3 multicast traffic for upper layer protocols. Multicast and Routing Guide
netinet Network Internet: Monitors the creation of a route or an
Address Resolution Protocol (ARP) entry and sends a log
message in case of failure. Advanced Traffic Management Guide
pagp Ports Aggregation Protocol (PAgP): Obsolete. Replaced by
LACP (802.3ad). Not used for logging messages in software
release K.13.
xx .
—
ports Port status and port configuration features, including mode
(speed and duplex), flow control, broadcast limit, jumbo
packets, and security settings.
Port messages include events on Power Over Ethernet (POE)
operation and transceiver connections with other network
devices. Installation and Getting Started Guide
Management and Configuration Guide
Access Security Guide
radius RADIUS (Remote Authentication Dial-In User Service)
authentication and accounting: A network server is used to
authenticate user-connection requests on the switch and
collect accounting information to track network resource
usage. Access Security Guide
ratelim Rate-limiting: Enables a port to limit the amount of bandwidth
a user or device may utilize for inbound traffic on the switch. Management and Configuration Guide
sflow Flow sampling: sFlow is an industry standard sampling
technology, defined by RFC 3176, used to continuously monitor
traffic flows on all ports providing network-wide visibility into
the use of the network. Management and Configuration Guide
snmp Simple Network Management Protocol: Allows you to manage
the switch from a network management station, including
support for security features, event reporting, flow sampling,
and standard MIBs. Management and Configuration Guide
sntp Simple Network Time Protocol: Synchronizes and ensures a
uniform time among interoperating devices. Management and Configuration Guide
System
Module
Description
Documented in ProCurve Hardware/
Software guide
C-31