HP 2910AL User Manual
Page 554
Advertising
Troubleshooting
Diagnostic Tools
Intermediate router hops
with the time taken for the
switch to receive
acknowledgement of
each probe reaching each
router.
Destination IP Address
Figure C-22. Example of a Completed Traceroute Enquiry
Continuing from the previous example (Figure C-22, above), executing
traceroute with an insufficient maxttl for the actual hop count produces an
output similar to this:
Traceroute does not reach
destination IP address
because of low maxttl
setting.
The asterisk indicates there was a
timeout on the second probe to the third
hop.
Figure C-23. Example of Incomplete Traceroute Due to Low Maxttl Setting
C-66
Advertising