Cli access to system information – HP 2910AL User Manual
Page 463
Monitoring and Analyzing Switch Operation
Status and Counters Data
CLI Access to System Information
The
show system command displays general system information about the
switch.
Syntax: show system [information | power-supply | temperature | fans]
Displays global system information and operational
parameters for the switch.
information
Displays global system information and operational
parameters for the switch.
power-supply
Shows chassis power supply and settings.
temperature
Shows system temperature and settings.
fans
Shows system fan status.
ProCurve(config)# show system fans
Fan Information
Num | State | Failures
-------+-------------+----------
Sys-1 | Fan OK
|
0
0 / 1 Fans in Failure State
0 / 1 Fans have been in Failure State
Figure B-3. Example of System Fan Status
B-7