Document Outline

• Bulletin 193 EtherNet/IP Communications Auxiliary
  • 1- Installation & Wiring
    • Introduction
    • Overview
    • Features
    • Installation
    • Wiring
    • Dimensions
    • Network Design
  • 2- Configure the EtherNet/IP Communications Auxiliary
    • Introduction
    • Determining Network Parameters
    • Setting the IP Network Address
      • EtherNet/IP Node Address Selection Switches
    • Assign Network Parameters via the BOOTP/ DHCP Utility
    • Assign Network Parameters Via a Web Browser & MAC Scanner Software
      • Other Factors to Consider When Assigning Network Parameters
    • Duplicate IP Address Detection
      • Behavior of Modules With Duplicate IP Addresses
    • DNS Addressing
    • Electronic Data Sheet (EDS) File Installation
      • Download the EDS File
        • Embedded in the Module
        • From the EDS File Download Site
      • Register the EDS File
  • 3- Configure the DeviceNet Network
    • Introduction
    • Configuration
  • 4- Add Devices to the DeviceNet Network
    • Introduction
    • DeviceNet Node Addressing
      • Node Address Basics
    • Set the Node Address
      • Using the Hardware Mechanism
      • Using the DeviceNet Node Commissioning Tool
    • Add DeviceNet Modules to the Scan List
      • Simple
      • User-Defined
  • 5- View & Configure Parameters
    • Introduction
    • View & Edit
  • 6- Automatic Device Recovery or Replace
    • Introduction
    • Setting ADR
  • 7- Automation Controller Communications
    • Introduction
    • Ethernet Messaging
    • I/O Messaging
      • ControlLogix Configuration with Add-On Profiles
      • EtherNet/IP Network Configuration with Add-On Profiles
      • Accessing Module Data with Add-On Profiles
      • ControlLogix Generic Configuration
      • EtherNet/IP Generic Module Configuration
      • Accessing Generic Module Data
    • Logic Explicit Messaging
  • 8- E-mail/Text
    • Introduction
    • E-mail Notifications
      • Events
      • E-mail Contents
      • E-mail Configuration
      • Configure Device Identity
      • Text Notifications
    • Limitations
  • 9- Device Parameters
    • Introduction
    • Parameter Programming
      • Parameter Listing
  • 10- Troubleshooting
    • Introduction
    • EtherNet/IP Modules of Operation
      • Power-Up Reset Mode
      • Run Mode
        • Operating as a Slave Device to a Master Device
        • Operating as a Master Device
      • Recoverable Error Mode
      • Unrecoverable Error Mode
    • Troubleshooting Procedures
  • A- Specifications
    • Specifications
  • B- EtherNet/IP & DeviceNet Information
    • Electronic Data Sheet (EDS) Files
    • Common Industrial Protocol (CIP) Objects
      • Identity Object — CLASS CODE 0x01
      • Message Router Object — CLASS CODE 0x02
      • DeviceNet Object — CLASS CODE 0x03
      • Assembly Object — CLASS CODE 0x04
        • Instance Attributes
        • Output Assemblies
        • Input Assemblies
        • Configuration Assembly
      • Connection Manager Object — CLASS CODE 0x06
      • Parameter Object — CLASS CODE 0x0F
      • Device Level Ring (DLR) Object — CLASS CODE 0x47
      • QoS Object — CLASS CODE 0x48
      • Non-Volatile Storage Object — CLASS CODE 0xA1
      • Port Object — CLASS CODE 0x0F4
      • TCP/IP Interface Object — CLASS CODE 0xF5
      • Ethernet Link Object — CLASS CODE 0xF6
• Back Cover