Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Bulletin 193 ethernet/ip communications auxiliary
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Bulletin 193 EtherNet/IP Communications Auxiliary
- 1- Installation & Wiring
- 2- Configure the EtherNet/IP Communications Auxiliary
- 3- Configure the DeviceNet Network
- 4- Add Devices to the DeviceNet Network
- 5- View & Configure Parameters
- 6- Automatic Device Recovery or Replace
- 7- Automation Controller Communications
- 8- E-mail/Text
- 9- Device Parameters
- 10- Troubleshooting
- A- Specifications
- B-
EtherNet/IP & DeviceNet Information
- Electronic Data Sheet (EDS) Files
- Common Industrial Protocol (CIP) Objects
- Identity Object — CLASS CODE 0x01
- Message Router Object — CLASS CODE 0x02
- DeviceNet Object — CLASS CODE 0x03
- Assembly Object — CLASS CODE 0x04
- Connection Manager Object — CLASS CODE 0x06
- Parameter Object — CLASS CODE 0x0F
- Device Level Ring (DLR) Object — CLASS CODE 0x47
- QoS Object — CLASS CODE 0x48
- Non-Volatile Storage Object — CLASS CODE 0xA1
- Port Object — CLASS CODE 0x0F4
- TCP/IP Interface Object — CLASS CODE 0xF5
- Ethernet Link Object — CLASS CODE 0xF6
- Back Cover