Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 21)

Rockwell Automation Publication 193-UM014B-EN-P December 2011 21
Chapter 2
9. The module will prompt the user for a User Name and Password. Type
“Administrator” as the user name, leave the password field blank, then click
OK.
10. Assign the appropriate network settings per the recommendation of the
network administrator for the network that this module will be
communicating on and click Apply.
11. Remove and reapply the DeviceNet connector to allow the
communications changes to take affect.