Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 26
Advertising
![background image](/manuals/577860/26/background.png)
26
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 2
1.
Start the EDS Hardware Installation Tool located at Start>Programs>
Rockwell Software>RSLinx Tools.
2.
Click Add to register a new device.
3.
Click the “Register a single file” radio button, then browse to the location
where the EDS file is located. Click Next.
Advertising
This manual is related to the following products: