Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 60
60
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 7
4.
Enter a name for the EtherNet/IP Communications Auxiliary. The name
will create a tag in RSLogix 5000 that can be used to read and write data
from the devices being scanned by the EtherNet/IP Communication
Auxiliary.
5.
Select Data-INT for the Comm Format. The Data-INT format wil l
represent the data from the EtherNet/IP Communications Auxiliary as a
field of 16-bit values.
6.
Set the Connection Parameters. I/O data is accessed using Input Instance
101 and Output Instance 100. The size of the input connection and the
output connection shall correspond to the size of the chosen instance. The
configuration assembly instance is 102.
NOTE:
In this example, configuration data is not used. Thus, the data size is set to 0