Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 38
Advertising
![background image](/manuals/577860/38/background.png)
38
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 4
1.
From the EtherNet/IP Communications Auxiliary web page, navigate to
Scan List>Configuration>Node Commissioning.
2.
Select the device where node address needs to be assigned. Once selected,
the Current Settings aand New Settings areas are populated.
3.
Double-click the “Node address” field’s value. The value will be
highlighted in blue.
Advertising
This manual is related to the following products: