Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 20)

20 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 2
4. Select the appropriate subnet to scan for available MAC addresses.
5. Scan the Subnet for all available MAC addresses.
6. Identify the IP address assigned to the MAC ID of the EtherNet/IP
Communications Auxiliary. The IP address will have a format that is
similar to 192.168.0.100.
7. Open a web browser and type the IP address on the address line to view the
internal web server of the EtherNet/IP Communications Auxiliary.
8. Select Administration Settings>Network Configuration to change the IP
address of the EtherNet/IP Communications Auxiliary to a static IP
address.