Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 33
Advertising
![background image](/manuals/577860/33/background.png)
Rockwell Automation Publication 193-UM014B-EN-P December 2011
33
Chapter 3
6.
Change the DeviceNet network address to the appropriate node address,
then click Save.
7.
Click OK to finish changing the scanner DeviceNet network address.
NOTE:
Typically, DeviceNet scanners have the node address of 0.
Advertising
This manual is related to the following products: