Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 40)

40 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 4
Add DeviceNet Modules to
the Scan List After each DeviceNet device has been assigned a unique node address, up to six
DeviceNet devices can be added to the EtherNnet/IP Communications Auxiliary
DeviceNet scan list. The EtherNet/IP Communications Auxiliary provide two
methods to configure the scan list, Simple and User-Defined.
Simple
1. From the EtherNet/IP Communications Auxiliary web page, navigate to
Scan List>Configuration>Scan List. The EtherNet/IP Communications
Auxiliary will read the available DeviceNet modules on the DeviceNet
network.
2. Click Config. The lowest six DeviceNet node addresses will populate into
the Scan List field on the right.