User-defined – Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 41
Rockwell Automation Publication 193-UM014B-EN-P December 2011
41
Chapter 4
3.
Click OK to complete the configuration.
The DeviceNet scanner on the EtherNet/IP Communications Auxiliary
will begin scanning the DeviceNet devices.
User-Defined
If there are more than six DeviceNet devices on the network, the user can select
up to six DeviceNet devices to scan. Follow the steps below to select specific
DeviceNet devices for the scan list.
1.
From the EtherNet/IP Communications Auxiliary web page, navigate to
Scan List>Configuration>Scan List. The EtherNet/IP Communications
Auxiliary will read the available DeviceNet modules on the DeviceNet
network.
2.
Select the DeviceNet device in the Network Who screen to be added to
the Scan List. The >> button becomes highlighted.