Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 53
Advertising
![background image](/manuals/577860/53/background.png)
Rockwell Automation Publication 193-UM014B-EN-P December 2011
53
Chapter 7
4.
Select the desired EtherNet/IP scanner module, then click OK.
5.
Enter the desired communication settings, then click Finish.
EtherNet/IP Network Configuration with Add-On Profiles
After the controller configuration, the EtherNet/IP Communications Auxiliary
has to be added to the I/O configuration.
Advertising
This manual is related to the following products: