Ethernet/ip generic module configuration – Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 58
Advertising
![background image](/manuals/577860/58/background.png)
58
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 7
4.
Select the desired EtherNet/IP scanner module, then click OK.
5.
Enter the desired communication settings, then click Finish.
EtherNet/IP Generic Module Configuration
Once the Logix controller has been configured, the EtherNet/IP
Communications Auxiliary must be added to the I/O configuration.
Advertising
This manual is related to the following products: