Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 90)

90 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Appendix B
Table 29 - Identity Object Class Attributes
Identity Object instances contain the following instance attributes.
Table 30 - Identity Object Instance Attributes
The following common services are implemented for the Identity Object.
Table 31 - Identity Object Common Services
Message Router Object — CLASS CODE 0x02
No class or instance attributes are supported. The message router object exists
only to route explicit messages to other objects.
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 0x0001
2 Get Max. Instance UINT 0x00011
Attribute ID Access Rule Name Data Type Value
1 Get Vendor ID UINT
2 Get Device Type UINT 12
3 Get Product Code UINT 220 for 193-DNENCAT
221 for 193-DNENCATR
4 Get Major Revision USINT 1
Minor Revision USINT 1
5 Get Status WORD Bit 0: Owned, shall be set when
at least one connection i configured
Bit 2: Configured
Bit 8: Minor Recoverable fault
BIt 9: Minor Unrecoverable fault
Bit 10: Major Recoverable fault
Bit 11: Major Unrecoverable fault
6 Get Serial Number UDINT Unique number assigned for
each device
7 Get Product Name SHORT_STRING Product name
8 Get State USINT 3=Operational
Service Code
Implemented for:
Service Name Class Instance
0x01 No Yes Get Attribute All
0x0E Yes Yes Get Attribute Single
0x05 No Yes Reset