Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 95)

Rockwell Automation Publication 193-UM014B-EN-P December 2011 95
Appendix B
Table 41 - Instance 102 (Revision 2)➊
The following services are implemented for the Assembly Object.
Table 42 - Ethernet Object Common Services
Connection Manager Object — CLASS CODE 0x06
No class or instance attributes are supported.
The following common service are implemented for the Connection Manager
Object.
Byte Size Contents
2 Bytes Revision = 2
2 Bytes ScanList I/O Size
2 Bytes Data Link Update Interval (ms)
2 Bytes Reserved
2 Bytes Data Link 1 Node
2 Bytes Data Link 1 Parameter
2 Bytes Data Link 2 Node
2 Bytes Data Link 2 Parameter
2 Bytes Data Link 3 Node
2 Bytes Data Link 3 Parameter
2 Bytes Data Link 4 Node
2 Bytes Data Link 4 Parameter
2 Bytes Data Link 5 Node
2 Bytes Data Link 5 Parameter
2 Bytes Data Link 6 Node
2 Bytes Data Link 6 Parameter
: : : : : : : :
2 Bytes Data Link 48 Node
2 Bytes Data Link 48 Parameter
➊ Available with firmware v 2.00 and higher.
Service Code
Implemented for:
Service Name Class Instance Consuming Instance Producing
0x0E Yes Yes Yes Get Attribute Single
0x10 No Yes No Set Attribute Single