Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 101)

Rockwell Automation Publication 193-UM014B-EN-P December 2011 101
Appendix B
Table 58 - TCP/IP Interface Object Common Services
Ethernet Link Object — CLASS CODE 0xF6
The following class attributes are supported for the Ethernet Link object.
Table 59 - Ethernet Link Object Class Attributes
The following one instance of the Ethernet Link object is supported.
Table 60 - Ethernet Link Object Instance
Service Code
Implemented for:
Service Name Class Instance
0x01 No Yes Get_Attributes_All
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Attribute ID Access Rule Name Data Type Value
1 Get Interface Speed UDINT 10 or 100 Mbit/sec
2 Get Interface Flags DWORD See ENet/IP Spec
3 Get Physical Address ARRAY of 6 USINTs MAC Address
4 Get Interface Counters Struct of:
In Octets
In Ucast Packets
In NUcast Packets
In Discards
In Errors
In Unknown Protos
Out Octects
Out Ucast Packets
Out NUcast Packets
Out Discards
Out Errors
5 Get Media Encounters Struct of:
Alignment Errors
FCS Errors
Single Collisions
SQE Test Errors
Deferred Transmits
Late Collisions
Excessive Collisions
MAC Transmit Errors
Carrier Sense Errors
Frame Too Long
MAC Receive Errors