Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual - Manual (Page 55)

Rockwell Automation Publication 193-UM014B-EN-P December 2011 55
Chapter 7
4. Enter a name for the EtherNet/IP Communications Auxiliary. The name
will create tags in RSLogix 5000 that can be used to read and write data
from DeviceNet modules being scanned by the EtherNet/IP
Communications Auxiliary.
5. Enter the IP address of the EtherNet/IP Communications Auxiliary.
6. Select Change to select a motor protection device with predefined tag
names for Data Mapping. For non-motor protection devices, select
Generic.
7. Select the appropriate data format, then click OK.
NOTE:
Predefined tag names exist for the E3 Plus EC1, EC2, EC3, EC4, and EC-5
models and the 825-P Overload Relay.