Rockwell Automation 193-DNENCATR EtherNet/IP Communications Auxiliary User Manual User Manual
Page 54
Advertising
![background image](/manuals/577860/54/background.png)
54
Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 7
1.
Place the program in offline mode.
2.
Right-click on the EtherNet/IP scanner within the I/O Configuration
folder, then select New Module to open the Select Module Type window.
3.
Select the appropriate device (either 193-DNENCAT or 193-
DNENECATR, then click OK.
Advertising
This manual is related to the following products: