Guardian Technologies Ademco VISTA-40 User Manual

Page 34

Advertising

Р 34 Р

Zone descriptors must also be programmed, regardless of the type of keypads in
use. If this is not done, the Phone Module will be unable to annunciate a
description of the zone(s) in alarm, trouble, etc. (the Phone Module will
annunciate zone numbers only). In addition, relay voice descriptors can be
programmed if output relays are being used.

WIRING NOTES:

1. Wire the 4285 Phone

Module exactly as shown,
using a direct-connect
cord and RJ31X jack.

2. If Touch-tones are not

present following phone
access to the security
system

via an on-

premises phone

, try re-

versing the pair of wires
connected to terminals 3 &
4 on the 4285, and the pair
of wires connected to
terminals 26 & 27 on the
control.

3. Connection to the incom-

ing Telco line via an
RJ31X jack and direct-
connect cord, as shown in
this diagram, is essential,
even if the system is not
connected to a central
station. The 4285 will not
function if this is not
done.

4. Phone module ground

terminals must terminate
to ground on the control.

5. There must be 7 volts or

greater while phone is "off-
hook" for phone module to
operate.

ANSWERING

MACHINE

@@@@@@@@e?

@@h?

@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e

@@@@@@@@

?@@

?@@@@@@@@

?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@

@@g

@@@@@@@@

TERMINALS

ON CONTROL

TO EARTH GROUND
(COLD WATER PIPE, ETC.)

NOT INSTALLER
ADJUSTABLE

UNUSED

KEYED
HEADER

4285

VOICE MODULE

345

YELLOW: TO DATA OUT (term. 7)

NO CONNECTION

RED:

TO AUX (+) (term. 5)

BLACK:

TO AUX. GROUND (–) (term.4)

GREEN: TO DATA IN (term. 6)

CONNECTOR
WITH FLYING

LEADS

TO CONTROL
PANEL
TERMINALS
USED FOR
KEYPAD
CONNECTIONS

PREMISES

ANSWERING

MACHINE

AND PHONES

Handset

Incoming

Telco Line

TIP

RING

RJ31X

JACK

PLUG

DIRECT

CONNECT

CORD

TIP

RING

GROUND TERMINAL

MUST

CONNECT

ON 4285

(TIP)

MUST

CONNECT

ON 4285

(RING)

GREEN

RED

INCOMING TELCO LINE

TO GND TERMINAL

(30) ON CONTROL

GRA

(RING)

BROWN (TIP)

4285

TERMINAL ASSIGNMENTS

1 - TIP
2 - RING

PHONE INPUT

3 - TIP
4 - RING

PHONE OUTPUT

5 - GROUND
6 -
7 -

AUDIO OUT 1
(FOR FUTURE USE)

}

{

IMPORTANT NOTE FOR

EXISTING INSTALLATIONS:

ANY EXISTING WIRES

CONNECTED TO THE
"HANDSET" TERMINALS
ON THE CONTROL MUST
BE MOVED FROM THERE
TO TERMINALS 3 AND 4
ON THE 4285.

@@@@@@@@e?

@@h?

@@@@@@@@

?@@

?@@@@@@@@

@@g

@@@@@@@@

CALLER ID

UNIT

NOTE: IF THE TELEPHONE HAS BUILT-IN CALLER ID,

THE CALLER ID FUNCTION MAY NOT WORK

CA38A

CANADA

}

4285 PHONE MODULE WIRING CONNECTIONS

Installations Where The

Telephone System Includes

An Answering Machine

When accessing the system via a phone, the programmed 2-digit phone code
should be entered during the first 20 seconds of the OUTGOING message on
the answering machine (preferably during a pause in the outgoing message),
before it begins recording an incoming message.
The reason for entry of the phone code during a pause is that touch tones
(produced by entry of the 2-digit phone code) might not be received by the
security system while an answering machine's outgoing voice message is on the
phone line. Also, entering the 2-digit phone code

before

the answering machine

starts recording will prevent the phone code tones from being recorded.

If there is difficulty obtaining phone access when trying to use this
procedure, instruct the end user to re-record the outgoing message on the
answering machine, but leave a 2-second pause at its beginning.

E x a m p l e :

(2-SECOND PAUSE)Ê THIS IS 555Ð1212. I CAN'T COME TO THE PHONE
JUST NOW. PLEASE LEAVE A MESSAGE AFTER THE TONE.

Advertising

This manual is related to the following products:

Ademco N7001V2

Popular Brands

Popular manuals