3. naming programs and writing to card – Miller Electric Welder User Manual
Page 109
OM-196 188 Page 103
13-3. Naming Programs And Writing To Card
All program types (Pulse, Adaptive Pulse, and MIG) can be stored on a data card
and retrieved. Setup and Control menus do not save to the card.
NOTE
1
Card Display
Use Mode Select button to select Card.
2
Moving Line
Moving line is under value that can be
changed. Use increase or decrease button
to change value.
3
Name Display
If no name is desired, press Parameter Se-
lect button to continue the write procedure.
Process
Sequence
SharpArc
> Card
Press
Below
> Write
Read
Delete
Done
#1 Pulse
035” Steel
Argon – Oxy
Press
Name? No
035” Steel
Argon – Oxy
Press
Name? Yes
5007992
Frame
⇒
Press
Write Done
Prg 1 to
Card Prg 1
Press
#1 Pulse
035” Steel
Argon – Oxy
Press
Name? Yes
035” Steel
Argon – Oxy
Press
Name? Yes
035” Steel
Argon – Oxy
⇒
Press
Name? Yes
5007992
Frame
Press
Write Done
Prg1 to
Card Prg1
Press
# 1 Pulse
5007992
Frame
Press
1
2
3
Name? No
5007992
Frame
Press
Yes
Parameter
Select
Parameter
Select
Parameter
Select
No
Parameter
Select
Increase
Parameter
Select
Increase/
Decrease
Parameter
Select
Increase
Parameter
Select
Parameter
Select
Allowable characters include: 0 thru 9, :, ;, <, =,
>, ?, @, A thru Z, [, , ], ^, _,‘, a thru z , blank , !, ”,
#, $, %, &, ’, (, ), *, +, –, ., /,