Rear panel (continued) – JVC BD-X201MS User Manual
Page 14
E-14
Component Names & Functions
Rear Panel (continued)
0
DV IN/OUT terminal
This I/O terminal for digital signals conforms with
IEEE1394 specifications.
• In order to select this terminal’s audio and video signals
for input, set INPUT SELECT from the INPUT SELECT
MENU screen to DV.
• REMOTE SELECT from the REMOTE MENU screen is
used to select a control method for this terminal as fol-
lows.
DV (SLAVE)
: The DVD recorder operates as a slave
device and is controlled by commands
from a master device.
DV (TRIGGER): The DVD recorder performs recording
in response to operation of the trigger
button on a camera capable of DV trig-
gering (i.e., a GY-DV5000 from JVC).
a
FOOT SW 1/2 terminal
FOOT SW 1 : For controlling the Record/Record Pause
functions of this unit by connecting to an
external switch (foot switch, etc.).
FOOT SW 2 : If an external switch (foot switch, etc.) is con-
nected, the following operations are per-
formed in response to switch signals from
the switch.
• Insert chapter marks and indexes while
recording to a DVD.
• Capture still images (JPEG) during play-
back of an unfinalized DVD with available
space.
• Capture still images (JPEG) of the input
video when a CD-R/RW with available
space is inserted.
For selecting the method of control by this terminal using
the FOOT SW1/2 items on the REMOTE (1/2) menu
screen. (
b
FOR SERVICE terminal (RJ-45)
• Connect this terminal to a PC that has been installed
with utilities for this unit, such as application software for
creating title/chapter menus.
• NETWORK settings must be carried out using the NET-
WORK MENU screen.
c
Optional-board slot cover
This cover is removed to allow commercially-available
optional boards to be installed.
d
Equipotential Terminal
Ensure proper connection of the equipotential terminal for
each device when connecting this unit to other devices.
e
AC IN terminal (3P)
For connecting to the power outlet using the power cord
supplied.
f
MAIN POWER switch
Switch for turning ON/OFF the power.
• When the power is turned ON, operating mode can be
selected using the AC IN MODE item on the SYSTEM
MENU (2/2) screen. (