JVC BD-X201MS - Manual (Page 15)

E-15
LCD Display and On-Screen Content
LCD Display
The following information and data is presented on the DVD recorder’s LCD display.
No. Description
1 Encoding format for audio recordings (LPCM / DOLBY DIGITAL / MPEG) …… MPEG can only be
selected when in the PAL mode.
Recording mode
: The encoding format set using AUDIO ENCODE from the RECORDER MENU (1/2)
screen is displayed. This will not be displayed when the AUDIO ENCODE item is set
to NO AUDIO.
Playback mode : The encoding format used for audio on the current disc is displayed. This will not be
displayed during playback of a recorded disc with the AUDIO ENCODE item set to
NO AUDIO.
2 Information relevant to the current mode.
„
Title number / Chapter number / Index number / Counter
Display details can be selected using the LCD item on the DISPLAY menu screen.
• Displays the title No., chapter No. and elapsed time of a title when the LCD item is set to
TITLE+CHAPTER.
• Displays the index No. and elapsed time of a title when the LCD item is set to INDEX.
Press the SET button to alternate counter display between elapsed time and remaining time.
Remaining Time: Displays the remaining time of the disc (hr: min) during recording and remaining
time of the title during playback.
„
When the LCD item is set to TITLE+CHAPTER
Notes
• The remaining disc and title time depend on the amount of data comprising video, and for this reason,
they should be taken as being a general indication and not an exact figure.
• When the PLAYBACK & 232C TYPE item on the SYSTEM MENU (1/2) screen is set to VTR, the
elapsed time and index No. will represent the total time and total number respectively as accumulated
from Title 1. (
X Page 68)
1
2
SET button
Title No. Chapter No. Title Recording Elapsed Time (hr: min: sec)
Disc Remaining Time
(hr: min) „ When the LCD item is set to INDEX
Index No. (4 digits)
SET button