JVC BD-X201MS - Manual (Page 33)

E-33
Settings & Controls for Recording
Adjusting of Audio Recording Levels
This DVD recorder’s audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from
the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording
levels to their default settings (i.e., unity gain).
Note: The AUDIO INPUT LEVEL switch on the DVD recorder’s rear panel can be used to select the reference input level for
analog audio (i.e., +4 dB or −8 dB).
Selecting the Adjustment Method
Adjusting the Audio Recording Levels
„ Return from setting screens to the normal display.
„ Recording levels can be adjusted in either Stop or Recording mode. Be sure to monitor the front panel’s audio level indicator as
the levels are being adjusted. Adjust the level so that the LED on the far right does not light.
Returning Audio Recording Levels to Default Settings (UNITY MODE)
„ Press and hold the L and K buttons simultaneously to return the audio recording levels to their default settings (i.e., unity
gain).
• Both of the audio recording levels will be fixed at the default setting.
1. Open the RECORDER MENU (2/2) screen.
To do this, select
r button from the RECORDER MENU (1/2) screen and
press the SET button.
2.
Make the required setting using AUDIO REC VOLUME MODE from the
RECORDER MENU (2/2) screen.
BOTH
: Audio levels are adjusted while both the CH1/CH2 are
maintained at the same volume.
INDEPENDENCE : The CH1/CH2 are adjusted separately.
Adjusting both channels together (BOTH) Adjusting both channels separately (INDEPENDENCE)
„ To raise the recording level
Press the M button while holding the L or K
button to raise the audio recording levels for
Channel 1 and Channel 2 simultaneously.
„ To adjust the Channel 1 level
Press either the M or N button while hold-
ing the L button.
Pressing the M button raises the recording
level.
Pressing the
N button lowers the recording
level.
„ To lower the recording level
Press the N button while holding the L or K
button to lower the audio recording levels for
Channel 1 and Channel 2 simultaneously.
„ To adjust the Channel 2 level
Press either the M or N button while hold-
ing the K button.
Pressing the M button raises the recording
level.
Pressing the
N button lowers the recording
level.
BACK
ASPECT AUTO
INDEX CREATION MANUAL
AUDIO CHANNEL (DV) 1,2ch → 1,2ch
AUDIO REC VOLUME MODE BOTH
RECORDER MENU (2/2)
RECORDER MENU (2/2) screen
OPERATE
PHONES REV STOP PLAY FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP AUDIO CH1
CH2
TITLE DOLBY DIGITAL
LPCM MPEG CHAPTER
SET
Audio level indicator
Buttons used
SET SET
SET SET