Playing back a disc (continued) – JVC BD-X201MS User Manual
Page 58
E-58
Playback
Playing Back a Disc (continued)
1.
Insert a disc.
The DVD recorder enters Stop mode.
2.
Play back.
There are two playback modes.
3.
Set to Still mode.
This is done by pressing the PAUSE button.
• The DVD recorder enters Still mode.
• If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
4.
Restart playback.
Press the PLAY button.
The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the DVD MENU screen during recording.
5.
Stop playback.
This is done by pressing the STOP button.
• The DVD recorder enters Stop mode.
• When the STOP button is pressed, the stop position will be registered and the next playback will start from the same posi-
tion. (Resume feature)
Clearing Resume Data
• When the STOP button is pressed while in the Stop mode, resume data will be cleared and the stop position will return to the
beginning of the first title.
• Resume data will be cleared upon ejecting the disc.
A Disc Set with No Menu
The title list can be used to play back a disc for which DVD MENU TYPE of the DVD MENU screen has been set to NONE.
(
Precaution regarding the playback
• During playback of a disc, if the input setting is DV then the sound can be delayed. In this case, change the input setting to
LINE or Y/C.
• If the disc is dirty or damaged good playback may not be possible. In this case either clean the disc or change it.
• When playing back an unfinalized disc containing mixed data such as screen aspect ratio of 4:3, squeezed, and letterbox for-
mat or a menuless disc, the wide information is not always correctly output.
Press the TOP MENU button.
Press the PLAY button.
• The title menu (TOP MENU) will appear.
1
Select the number of the title to be played.
Use the
j, i, h, and g buttons to select the title number
for playback.
2
Press the SET button to begin playback.
The first title is played back.
TITLE END item setting during recording
Set to MENU
Set to REPEAT
Set to STOP
Set to NEXT TITLE
Enters stop mode and the title
menu (TOP MENU) is dis-
played.
Repeats playback within the
title.
Enters the stop mode. The title
menu (TOP MENU) is not dis-
played.
Stops at the beginning of the
first title.
Next title is played. When
playback of the final title fin-
ished, the first title is played.
(Disc repeat playback)