JVC BD-X201MS - Manual (Page 25)

E-25
Preparation
Setting & Displaying the Date & Time
Use the following procedure to set the internal clock’s date and time. Even when the DVD recorder’s power is turned off, the
clock’s date and time settings are stored using the internal battery.
Note that these settings are used to write the current date and time to a disc being recorded.
The DISPLAY screen can be used to indicate whether or not the date and time are to be displayed on-screen.
Setting the Date and Time
Setting of the date and time is carried out using the CLOCK ADJUST MENU
screen. During this procedure, the monitor connected to the VIDEO LINE OUT
terminal is used to monitor the setting of data.
„
Turn on the power and ensure that the DVD recorder is stopped.
1.
Press the SET UP button to display the Setup Menu.
2.
Open the CLOCK ADJUST MENU screen.
1Use the
M and N buttons to select CLOCK ADJUST. (The currently
selected menu item is displayed as highlighted.)
2Press the SET button to open the CLOCK ADJUST MENU screen.
3.
Set the date and time as required.
1Use the
M and N buttons to select either DATE or TIME. Then press the
SET button.
2Use the K and L buttons to select the digit to be changed. (The currently
selected digit is displayed as highlighted text.)
3Use the M and N buttons to change the value of the selected digit.
4Repeat steps 2 through 3 to make all of the required settings, and then
press the SET button.
Note
It is not possible to set the time in units of seconds. After setting the minutes,
press the SET button in sync with a time signal.
4. After completing all of the required settings, return to the Setup Menu.
To do this, use the
M or N buttons to select MENU and then press the SET
button.
5.
Return to the normal screen display.
• To do this, press the SET UP button
or
• Select EXIT from the Setup Menu and press the SET button.
M button
SET UP button
K button
N button L button
SET button
EXIT
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
MENU
DATE 04/05/06
10:00
TIME
CLOCK ADJUST MENU
DATE SETTING
SET
04 / 05 / 06
4 5 06
YEAR MONTH DAY
MENU
DATE 04/05/06
12:00 TIME
CLOCK ADJUST MENU
CLOCK SETTING
07 44
07 : 44
SET
CLOCK ADJUST MENU screen
Setup Menu