JVC BD-X201MS - Manual (Page 74)

E-74
Setup Menu
RECORDER MENU Screen (continued)
RECORDER MENU (2/2) screen
Parameter Possible settings Description
AUDIO CHANNEL
(DV) [1,2ch r 1,2ch]
3,4ch r 1,2ch
This parameter is to be set when recording an audio signal from the DV IN/OUT terminal.
Specifically, it indicates whether the signals from channels 1 and 2 or from channels 3 and 4 are
to be recorded. (Only available for 32 kHz)
1,2ch
r 1,2ch : Channels 1 and 2 are to be recorded.
3,4ch r 1,2ch : Channels 3 and 4 are to be recorded.
dV CH [1 2]
3 4
AUDIO REC
VOLUME MODE [BOTH]
INDEPENDENCE
This parameter is used to select the method for adjustment of audio recording levels. Specifical-
ly, both channels can be adjusted while maintaining the same level, or each channel can be ad-
justed independently.
BOTH
: Both channels are to be adjusted while maintaining the same level.
INDEPENDENCE : Both channels are to be adjusted independently.
VRModE [boTH]
INdE
ASPECT [AUTO]
4:3
LETTER
SQUEEZE
The screen aspect distinction signal of recorded video is selected.
AUTO
: Aspect distinction signal is recorded according to the screen aspect ratio of
the input video.
4:3 : Constantly records aspect distinction signal of 4:3 aspect ratio.
LETTER : Constantly records aspect distinction signal of letterbox video. (Content at
the top and bottom of the screen is blackened out.)
SQUEEZE : Constantly records aspect distinction signal of squeezed video. (Content at
the left and right of the screen is compressed.)
Note
Setting this item to LETTER or SQUEEZE will not change the output image during
recording and is reflected only in the recording to the disc.
ASPECT [AUTo]
4 3
LETT
SqUE
INDEX CREATION MANUAL
[AUTO]
For selecting whether to insert indexes automatically at record start points and recording pause
point.
MANUAL
: Index will not be automatically inserted.
AUTO : Index automatically inserted.
Note
The writing of index at the recording pause point is valid when the AUTO CHAP-
TER (REC PAUSE) item is set to ON. INdEX MANU
[AUTo]
BACK This button is used to return to the RECORDER MENU (1/2) screen.
bACK