JVC BD-X201MS - Manual (Page 77)

E-77
Setup Menu
DISPLAY MENU Screen
The following table identifies and describes the parameters that may be set using the DISPLAY screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter Possible settings Description
DISPLAY OFF
[ON]
This parameter is used to indicate whether or not status and alarm information is to be displayed
on the monitor screen.
OFF
: No such data is to be displayed on-screen.
ON : Data is to be displayed on-screen.
When this parameter has been set to ON, the following parameters can be
used to indicate which types of status information will be displayed
dISPLY oFF
[oN]
TITLE/CHAPTER/
INDEX [OFF]
TITLE+CHAPTER
INDEX+TITLE
For selecting whether to display the title/chapter/index information of a DVD disc onscreen dur-
ing recording or playback.
OFF
: Do not display onscreen
TITLE+CHAPTER: Display title and chapter onscreen
INDEX+TITLE
: Display index and title onscreen
These will not be displayed onscreen when the DISPLAY menu item is set to OFF.
TITLE [oFF]
T+C
I+T
RECORDER
MODE [OFF]
ON
This parameter is used to indicate whether or not the DVD recorder’s current status is to be dis-
played on-screen.
OFF
: The status is not to be displayed on-screen.
ON : The status is to be displayed on-screen. Note, however, that nothing will be
displayed when OFF has been set for the DISPLAY parameter.
ModE [oFF]
oN
TIME/DATE [OFF]
DATE
TIME
TIME+DATE
This parameter is used to indicate whether or not the current date and/or time are to be displayed
on-screen.
OFF
: No such information is to be displayed on-screen.
DATE : Only the date is to be displayed.
TIME : Only the time is to be displayed.
TIME+DATE : Both date and time are to be displayed.
• When the DVD recorder is stopped or recording, data from the internal clock is displayed.
When playing a disc, the date and time of disc recording are displayed.
• Even if DATE, TIME, or DATE+TIME have been selected, nothing will be displayed when OFF
has been set for the DISPLAY parameter.
dATE [oFF]
dATE
TIME
T+d
REMAIN [OFF]
ON
This parameter is used to indicate whether or not the disc’s remaining time (in minutes) is to be
displayed on-screen.
OFF
: No such data is to be displayed on-screen.
ON : This data is to be displayed on-screen.
• During recording, the remaining space available for recording is displayed (in minutes).
During playback, the time remaining in the current title is displayed.
• Nothing will be displayed when OFF has been set for the DISPLAY parameter.
Note
The remaining space available for recording will depend on factors such as the
number of titles recorded and the data encoding method; accordingly, this value
should be treated as an estimate and not as an exact value.
REMAIN [oFF]
oN
DATE STYLE YY/MM/DD
[MM/DD/YY]
DD/MM/YY
This parameter is used to select the display style for dates.
YY/MM/DD
: Dates are to be displayed in year, month, and day sequence.
MM/DD/YY : Dates are to be displayed in month, day, and year sequence.
DD/MM/YY : Dates are to be displayed in day, month, and year sequence.
Default Setting : MM/DD/YY (NTSC)
DD/MM/YY (PAL)
dSTYLE YMd
[MdY]
dMY
LCD [TITLE+CHAPTER]
INDEX
For selecting the DVD disc information to display (title/chapter/index) on the LCD during record-
ing or playback.
TITLE+CHAPTER: Display title and chapter on LCD
INDEX
: Display index on LCD
LCd [T+C]
INd
MENU This button is used to return to the Setup Menu screen.
MENU