JVC BD-X201MS - Manual (Page 62)

E-62
Playback
Index Writing and Index Search (continued)
2.
Selecting an index to search or erase.
Upon starting up the INDEX MANAGER screen, the title and index of the point for which its screen is called up will be
selected.
„
When selecting a title No.
1Press the cursor buttons ( r/q/x/y) on the main unit to highlight the title selection buttons (r/q/B/A) on the INDEX
MANAGER screen.
2Press the SET button on the main unit to select the title No.. The title No. changes each time the SET button is pressed.
The selected title No. will be displayed on the Title No. Display Area.
„ When selecting an index No.
1Press the cursor buttons ( r/q/x/y) on the main unit to move within the INDEX LIST and highlight a specific index No..
2Press the SET button on the main unit and the highlighted index No. will be selected.
• The selected index No. will be displayed on the Index No. Display Area.
* To scroll the INDEX LIST automatically, highlight the
g/h buttons on the INDEX MANAGER screen, followed by
pressing the SET button on the main unit.
3. Performing index search.
1Press the cursor buttons (
r/q/x/y) on the main unit to highlight the PLAY button on the INDEX MANAGER screen.
2Press the SET button on the main unit to execute index search.
• The unit will automatically search for the index position and play back accordingly.
• The INDEX MANAGER screen disappears.
4. Erasing indexes.
Select an index according to the procedure in 2. above.
1Press the cursor buttons (
r/q/x/y) on the main unit to highlight the ERASE button on the INDEX MANAGER screen.
2Press the SET button on the main unit to display the confirmation dialog box.
3Once erase is executed via the confirmation dialog box, the selected index will be deleted.
• When doing so, an “INDEX ERASE” message will be displayed on the panel of the main unit as well as onscreen for
approximately 3 seconds.
• INDEX LIST on the INDEX MANAGER screen will be sorted.
„ When erasing all indexes in a title,
there is no need to select the indexes.
1Select the ALL ERS button on the INDEX MANAGER screen, followed by pressing the SET button on the main unit.
• A confirmation dialog box will be displayed.
2Once erase is executed via the confirmation dialog box, all indexes of the selected titles will be deleted.
5. Quitting the INDEX MANAGER screen.
Press the SET UP button on the main unit.
Note
Arrow keys (
r/q/x/y) and the Enter key on the keyboard can also be used as a substitute to the cursor and SET buttons on
the main unit respectively.