JVC BD-X201MS - Manual (Page 19)

E-19
LCD Display and On-Screen Content
Event Messages
Event messages are displayed on the DVD recorder’s LCD display and on the monitor when incorrect operations are attempted.
These messages will remain on-screen for approximately 3 seconds.
Monitor message
LCD display
message
Description
INVALID TV INVALId TV A signal of an invalid format has been input.
Alternatively, an attempt has been made to play a disc containing signals of an
invalid format.
TITLE FULL TITLE FULL Recording was attempted on a disc already containing 99 titles.
INDEX FULL INdEX FULL An attempt was made to add a index to a title already containing 99 indexes.
CHAPTER FULL CHAP FULL An attempt was made to add a chapter to a title already containing 99 chapters.
NOT FINALIZE NoT FINAL An attempt was made to eject a disc before it was finalized.
A L-xxxx-R Set value is displayed when changing the recording level of analog audio.
d L-xxxx-R Set value is displayed when changing the recording level of digital audio.
OPE LOCK oPE LoCK This is displayed when buttons on this unit are operated while the Operation Lock is
activated. Operation Lock can be canceled by setting the OPERATION LOCK item
on the SYSTEM MENU (2/2) screen to OFF.
IMAGE FULL IMAgE FULL This is displayed when a still image is captured if more than 1000 still images have
already been captured.
NOT WRITABLE NoT WRITE • This is displayed when the capture operation is performed if 1000 still images
have already been written to disc.
• This is displayed when the capture operation is performed for a finalized disc.
000 min
04/05/06
11:20:00 TITLE 01 0:11:22
CHAPTER 01 0:11:22
REC
TITLE FULL
Event messages:
Displayed when
DISPLAY from the
DISPLAY MENU
screen is set to
ON.
Event message
Monitor screen
LCD display