JVC BD-X201MS - Manual (Page 78)

E-78
Setup Menu
CLOCK ADJUST MENU Screen
The following table identifies and describes the parameters that may be set using the CLOCK ADJUST MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
NETWORK MENU Screen
The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
* The IP ADDRESS SETTING item cannot be selected.
Parameter Possible settings Description
DATE This parameter is used to set the date.
dATE
TIME
This parameter is used to set the time.
TIME
MENU
This button is used to return to the Setup Menu screen.
MENU
Parameter Possible settings Description
HOST NAME [bdx201m]
CANCEL
This parameter is used to enter this DVD recorder’s network name using a keyboard.
The name cannot be input from this DVD recorder.
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen (-))
CANCEL
: Cancel setting the host name.
HoST
IP ADDRESS [192.168.0.2] This parameter is used to set the IP address. It is important to ensure that no two devices on a
single network share the same IP address.
IP Add [192]
SUBNET MASK [255.255.255.0] This parameter is used to set the subnet mask. Connected DVD recorders should have the
same network setting.
SUbNET [255]
DEFAULT
GATEWAY [192.168.0.254] This parameter is used to set the gateway address. Connected DVD recorders should have the
same address.
GATE [192]
MENU This button is used to return to the Setup Menu screen.
MENU
For more details regarding date and time set-
tings, refer to page 25.