P4 mmc: mmc settings, P5 b-u/rst: backup/restore using a removable disc – Strahl D1600mkII User Manual

Page 101

Advertising
background image

93

COUNTER

Reference

SYSTEM /

USB

RECORD

TRACK

SONG /

CD

STORE

MARK

SCENE

TEMPO /

RHYTHM

IN / LOC1...

END / LOC4

AUTO

PUNCH

LOOP

UNDO

TRIGGER

SCRUB

ENTER

INPUT /

TUNER

EQ /

PHASE

INSER

T

FX

MASTER

FX / AUX

SOLO /

MONITOR

METER /

Tr VIEW

Tr

ST

ATUS

PA

N

FADER

TRANSPORT

P4 MMC: MMC settings

The D1600mkII transmits and receives MMC (MIDI Machine
Control) messages.
When synchronizing two D1600mkII units, or when using
the D1600mkII together with an MMC-compatible MIDI
sequencer, you can playback, stop, or fast-forward etc. by
operating only the master device.

Some MIDI devices may not respond to the MMC func-
tionality of the D1600mkII. Details on the MMC func-
tionality of the D1600mkII are given in the MIDI
implementation.

1. Select MMC Mode ................... [Transmit, Receive, Off]

Turn MMC transmission or reception on/off.
Transmit

: MMC will be transmitted.

Receive

: MMC will be received.

Off

: MMC will not be used.

2. MMCDevID (MMC Device ID) ......................[000...127]

Specify the device ID that will be used when transmit-
ting/receiving MMC.
To enable MMC transmission/reception, connect the
external MIDI device to the D1600mkII via MIDI, set the
device ID to match, and set “Select MMC Mode” appro-
priately.

If this parameter is set to “127,” MMC can be trans-
mitted/received to/from all ID numbers.

P5 B-U/Rst: Backup/restore using a

removable disc

Here you can backup (save) and restore (load) data to and
from a removable disc such as CD-R or CD-RW.
You can restore the following data.
• D1600mkII backup data
• D12 backup data
• D16 backup data
• D1200 backup data
• D1200mkII backup data

For details on data compatibility, refer to p.81
When backing up to CD-R/RW, you cannot save more
than one backup on a single disc.

1. B-U/RstType .............. [Backup1Song, BackupAllSongs,

BackupUserData, Restore]

Selects the type of backup or restore operation.
You can press the “ ” button and make your selection in
the following dialog box.

Details of each operation you can select here are
explained below.

B-U/Rst Type: Backup 1 Song

This operation backs-up the selected song and the effect user
data.

2. Source ......................................................(001...100)

Indicates the backup-source song number. This is the
song number of the song you selected in the [SONG/
CD] “SelSong” tab page.

3. Drive ............................................................ [S, C, U]

Selects the backup-destination drive. The drive ID, drive
information (type and capacity), and format type is dis-
played.
For this operation you can select either “C” or “U”.
S:HDD

: The song drive of the hard disk. You can’t select

this here.
C:CD

: The CD-R/RW drive.

U:USB DOS

: The USB drive of the hard disk.

3a. Format Type ..............................(B, D16[B], Audio)

Shows the format type of the CD-R/RW disc.
[B] (Backup Type)

: D1600mkII or D16/D1600 backup

CD
D12[B]

: D12, D1200, or D1200mkII backup CD

Audio

: audio CD

If the disc is blank, the format type will not be
displayed.

4. Destination........... (C, U:CDx01...99, SONG001...100)

Shows the backup-destination drive and drive informa-
tion (C:CD x the number of discs required, or U:song
name).

When backing up to CD-R or CD-RW, you must use
blank discs.

1

2

1

3
6

2

4

5

3a

SYSTEM /

USB

Advertising