Strahl D1600mkII - Manual (Page 42)

34
6. Press the “No” button in the dialog box.
The [SONG/CD] “CDR/RW” tab page will appear.
If you want to write additional songs, select the next song and then
perform steps 1–6.
7. Press the “Final” button.
A message will ask you to confirm that you really want to finalize the
disc.
A CD is not completed as an audio CD (i.e., cannot be played back
by a CD player) until you finalize the disc.
You cannot write any more songs to a disc that has been finalized.
If you want to write more than one song to a CD, you must write
all of the songs to the disc before pressing the “Final” button to
finalize it.
8. If you are sure you want to finalize the disc, press the “OK” button.
When finalization is finished, a message of “Completed” will appear,
and the CD-R/RW tray will open.
9. Remove the CD and press the “OK” button.
The original CD of your own performance is now completed.
Check the audio CD
1. Play back the CD in an audio CD player.
If you want to create another
identical CD, press the “Yes”
button.
If you want to write songs to
more than one CD, write the
songs to all the CDs, and then
finalize the CDs.