Strahl D1600mkII - Manual (Page 139)

131
COUNTER
Reference
SYSTEM /
USB
RECORD
TRACK
SONG /
CD
STORE
MARK
SCENE
TEMPO / RHYTHM
IN / LOC1... END / LOC4
AUTO PUNCH
LOOP
UNDO
TRIGGER
SCRUB
ENTER
INPUT / TUNER
EQ / PHASE
INSER
T
FX
MASTER FX / AUX
SOLO / MONITOR
METER / Tr VIEW
Tr
ST
ATUS
PA
N
FADER
TRANSPORT
6. Store..........................................................................
The effect program whose name or parameters you
modified can be stored in user areas “u033”–“u064.”
The D1600mkII provides 32 user areas for final effects.
In the “StoreEffect” dialog box, specify the “user area
number” and press the “Exec.” button to store the effect.
To cancel, press the “Cancel” button.
Effects are always overwritten.
P1 Solo: Solo select
1. SelectSolo ........... [1...16, S1, S2, A1, R1, R2/On, Off]
Switch the solo function on/off.
Only the audio for which the “Solo” button is “On” will
be sent to the monitor bus. Use this function when you
wish to hear only a specific channel (or channels) out of
multiple audio sources, or to check the send etc. The solo
signal will be output to the [MONITOR OUT L/R] jacks
and to the [PHONES] jack.
If one or more are “On,” the [SOLO/MONITOR] key
will blink.
On : Solo is on. Only the selected signal(s) will be
heard.
Off : Solo is off. If another signal is set to solo on, sig-
nals for which solo is off will be muted.
1…16
: Mixer channels 1–16
S1, S2 : Sends to master effects 1 and 2
A1 : Send to external output [AUX OUT] jack
R1, R2 : Return from master effect 1 and 2
To adjust the volume of each signal, use the corre-
sponding pages or knobs. Be aware that when you
switch the signal that is selected, some settings may
cause the monitor volume to change dramatically.
Please use caution.
2. ClearAll .....................................................................
This turns “Off” all “SoloSelect” settings that were
“On.”
3. SoloToMstOut............................................... [On, Off]
This specifies whether the solo signal will be output
from the [MASTER OUT L/R] jacks. Use this setting if
you have connected your monitor system to the [MAS-
TER OUT L/R] jacks and wish to use it for soloing.
On : The solo signal will be output from
the [MASTER OUT L/R] jacks.
The “On” setting is valid only within the [SOLO/MONITOR]
page. When you exit this page, it will automatically be turned
“Off.”
Off : Normal operation. The solo signal
will be output from the [MONITOR OUT L/R] jacks and
from the [PHONES] jack.
21. SOLO/MONITOR
1
2
3
SOLO / MONITOR