Strahl D1600mkII - Manual (Page 16)

8
1. Objects in the LCD screen
The LCD screen of the D1600mkII features the Touch
View system, which uses a touch panel.
By pressing objects displayed in the LCD screen you can
perform operations such as selecting pages, setting
parameter values, moving the cursor location, or editing
settings.
In this manual, terms enclosed in “quotation marks”
such as “...”, “...” button, or “...” tab refer to objects in
the LCD screen which you can operate. Terms
enclosed in square brackets such as [...] key, [...] knob,
[...] dial, or [...] fader refer to controls etc. located on
the top panel, front panel, or rear panel.
a: Current parameter display
This is the name of the parameter currently selected by
the edit cell.
For icon-type parameters such as EQ or fader, the value is
displayed at the right.
b: Edit cell
When you select a parameter in the LCD screen, the
parameter value will be highlighted in some cases. This
area is referred to as the edit cell, and your editing will
apply to the highlighted portion.
The parameter value in the edit cell can be modified using
the [VALUE] dial or by using the popup buttons in the
LCD screen.
c: Popup button
When you press this button, a dialog box (f) will appear.
To enter a parameter value, choose the desired value
from the dialog box.
, ,
d: Toggle button
Pressing this type of button will alternately switch a
function between on/off.
(on)/ (off)
e: Tab page
Each mode contains numerous parameters, which are
organized into pages. Each page is accessed by its own
tab
.
f: Dialog box
To execute, press the “OK” button. To cancel, press the
“Cancel” button. The dialog box will close.
g: Radio buttons
These buttons are used to select one of multiple items.
Press one of the radio buttons.
h: Icons
These are objects shaped like faders or knobs. To modify
a value, select it and rotate the [VALUE] dial.
i: Scroll buttons
These buttons are used to view parameter values that can-
not be displayed in a single screen.
2. Adjusting the LCD screen
contrast
Use the rear panel [LCD CONTRAST] knob to adjust the
contrast.
Objects in the LCD screen and
their functions
e: Tab
a:Current parameter
display
c: Popup
button
d:Toggle
button
b: Edit cell
g: Radio buttons f: Dialog box
h: Icons
i: Scroll buttons