Strahl D1600mkII - Manual (Page 26)

18
9. When you have finished performing, press the [STOP] key.
Recording will stop, and the [REC] and [PLAY] LEDs will go dark.
In the track view screen, the region from the beginning to the end of
your audio recording is displayed as a thick line.
Areas in which you did not perform are also displayed as a thick line.
9. Play back
Now we’ll play back the recorded song from the beginning.
[TRACK STATUS] key setting
Specify the track that you want to play back.
1. Press the front panel track 8 [TRACK STATUS] key to select PLAY
(LED lit green).
Playback
2. Hold down the [STOP] key and press the [REW] key.
The counter time will move to the beginning of the song.
3. Press the [PLAY] key.
Playback will begin, and the [PLAY] LED will light. Use the [MAS-
TER] fader to adjust the volume.
You can use the front panel [PHONES] knob to adjust the volume of
your headphones, or the top panel [MONITOR OUT LEVEL] knob to
adjust the volume of your monitor speakers.
4. To stop playback, press the [STOP] key.
The [PLAY] LED will go dark.
To stop the rhythm, access the
[TEMPO/RHYTHM] “Setup”
tab page and press the
“Rhythm” button to turn it
“Off.”
For details on the counter dis-
play and how to change the
time location, refer to “Chang-
ing the time location” (→p.46).