Parts and their function, Top panel, Ts and their function – Strahl D1600mkII User Manual
Page 11
3
1. Top panel
1 LCD screen
The D1600mkII uses a TouchView system based on a
touch panel screen. By pressing objects that are
shown in the LCD screen, you can select pages, tabs,
and parameters, and set their values.
Also displayed are the volume (level meters), time
locations (locate) during recording or playback, and
various other parameters.
2 [TRACK STATUS] keys
These keys are used to put each track into playback,
record, or to mute (silence) status. Each time you
press a key, the track setting will alternate.
• Green: PLAY
• Orange: INPUT
• Red: REC
• Dark: MUTE
When recording from analog/digital input, you can
arm up to eight recording tracks.
These settings can be paired.
3 [PAN] knobs (Ch1…16)
These knobs adjust the stereo location of each chan-
nel.
These settings can be paired, and registered in a
scene.
4 [CHANNEL] faders (Ch1…16)
These faders adjust the recording/playback volume
of each channel.
These settings can be paired, and registered in a
scene.
5 [MASTER] fader
This adjusts the volume of all channels. During
bounce recording, this sets the recording level of the
bounce destination track.
6 TRANSPORT keys
[REC] key, [RHSL] key, [PLAY] key, [STOP] key,
[REW] key, [FF] key
These are used to perform recording operations such
as playback and record.
7 [VALUE] dial
This is used to modify parameter values, and to move
the current time.
When the Scrub function is on, rotating the dial will
cause the track to play at the corresponding speed.
8 [CURSOR] key
This key moves the cursor.
Parts and their function
1
33
34
2
3
4
5
8
32
7
6
9
12~31
10
11