Strahl D1600mkII - Manual (Page 106)

98
Sel Operation: Format/U
This operation DOS-formats the USB drive of the hard disk.
1. Exec. (Execute) ...........................................................
Executes DOS-formatting of the USB drive.
1a. Quick SW .............................................. [On, Off]
Select the type of formatting, and press the “Yes” button
to begin formatting.
On: Select this if you simply want to erase all the
data saved on the USB drive. Since this will only initial-
ize the management area of the drive, it will not require
very much time for execution.
Off: Select this if “Disk Error” messages appear
frequently, or if the drive is not recognized even after
being formatted with “Quick” turned on.
Formatting with “Quick” turned off will require a
substantial amount of time.
USB drive (2 GB): approximately 35 minutes
Sel Operation: Format All
This operation formats both the song drive and the USB drive
of the hard disk.
1. Exec. (Execute) ...........................................................
Executes formatting of the entire hard disk.
1a. Quick SW .............................................. [On, Off]
Selects the type of formatting.
On: Select this if you simply want to erase all
songs and all data saved on the USB drive. Since this will
only initialize the management area of the drives, it will
not require very much time for execution.
Off: Select this if “Disk Error” messages appear
frequently.
Formatting with “Quick” turned off will require a
substantial amount of time.
40 GB: approximately 10 hours and 30 minutes
2a. Force ..................................................... [On, Off]
Forces formatting to be performed even if the drive con-
tains protected songs.
On: The drive will be formatted even if it con-
tains songs protected by the “ProtectSong” setting.
Off: If the drive contains songs protected by the
“ProtectSong” setting, a message of “SongProtect” will
appear when you execute, and the operation will be
aborted.
Press the “Yes” button to begin formatting.
Sel Operation: Load System/C, Load System/U
These operations load the D1600mkII’s operating system
program from the CD-R/RW drive or the USB drive to up-
date the system. For details, refer to “Updating the system”
(→p.86).
1
1a
1
1a
2a