Strahl D1600mkII - Manual (Page 122)

114
On : Filtering will be turned on for the corresponding
channel or parameter, and the settings of the scene will
be ignored.
Off
: Filtering will be off; the settings of the scene will be
applied.
3. SceneNumber .......................................... [001…100]
This recalls the mixer settings of a scene to the current
time location.
This is also used to recall a scene when you wish to mod-
ify its name or to change its time location.
The time location at which the scene is registered is
shown beside “SceneNumber.”
If “SceneRead” is “Off,” you can select any desired
scene. If this is “On,” the scene for the current time will
be selected, and cannot be chosen manually.
4. Sort ...........................................................................
Sort scenes in order of time.
Normally, scenes are arranged in the order in which they
were registered, but you can sort them in ascending
order of registered time.
Undo is not available after executing Sort.
5. Rename .....................................................................
This lets you modify the name of a scene.
Use “SceneNumber” to recall the scene whose name you
wish to modify, press the “Rename” button to access the
dialog box, and modify the name. A name of up to six-
teen characters can be used. For details, refer to “2. Nam-
ing a song” (→p.35).
If the [SONG/CD] “SelSong” tab page item “Select Disp
Parameter” is set to “Scene,” the scene name will be dis-
played in that page.
6. EditLoc .......................................................................
This lets you change the registered time of a scene.
Use “SceneNumber” to recall the scene whose location
you wish to change.
Press the “EditLoc” button to access the dialog box, and
modify the location of the scene.
Use the cursor to select the time that you wish to modify,
and use the [VALUE] dial to modify the time.
Press the “OK” button to finalize the change, or press
“Cancel” button to cancel the change.
7. Delete........................................................................
This lets you delete a scene.
The Undo function is not available after you delete a
scene.
7a. SelectAll................................................. [On, Off]
This selects all scenes for deletion.
On : All scenes will be subject to deletion.
The scene number will be displayed as “***.”
Off : The single scene selected in “Scene-
Number” will be subject to deletion.
8. EditFilter ....................................................................
This lets you view and edit the filter settings that are
stored in the scene.
You can view and edit the filter settings you made in the
“Filter” tab page.
Even when you store a scene with filtering applied, the
parameter values at that time are actually stored in the
scene. By using this page to edit the filter settings, you
can restore those parameters to the values they had
when the scene was stored.
9. Recall ........................................................................
This recalls the settings that are registered in a scene.
If you recall a scene and edit the EQ etc., pressing the
“Recall” button to recall it will recall the settings prior to
editing (i.e., the mixer settings that were registered in the
scene).
10. OvrWrt......................................................................
This overwrites the current mixer settings onto the
currently selected scene number. Use this when you
wish to make detailed adjustments to the scene, or to
replace it with a different scene.
11 EDIT...........................................................................
This will appear if the parameters stored in the scene
have been edited.
P2 MixView: Pan/fader scene
display
1. Pan .................................................... (Pan1…Pan16)
This shows the currently selected pan settings.
When you select an icon, the channel number and set-
ting value will be displayed in the upper left.
2. Level.....................................................(Lev1…Lev16)
This shows the currently selected channel fader settings.
When you select an icon, the channel number and set-
ting value will be displayed in the upper left.
7a
1
4 2
3