Strahl D1600mkII - Manual (Page 32)

24
Play back a virtual track
1. Hold down the [STOP] key and press the [REW] key to return to the
beginning of the song.
2. Press the [TRACK STATUS] key to set the recorded tracks to PLAY.
3. Press the [PLAY] key to play back.
At this time, the virtual tracks selected in the [TRACK] “Vtr 1–8” tab
page will play.
You can select different virtual tracks in the [TRACK] “Vtr 1–8” tab
page while you play back, and compare the different takes.
4. When you have finished listening, press the [STOP] key.
4. Make insert effect settings
If you want to apply effects while you record, make insert effect settings
as follows.
Select an insert effect
1. Press the [INSERT EFFECT] key to access the [INSERT EFFECT]
“InsAsn” tab page.
2. Press the “ ” button located at the right of “Assign” to open the
“Select EffectAssign” dialog box.
Here you will select whether the insert effect will apply to input or to
playback.
3. Select the “Input” radio button, and press the “OK” button.
Select the “Input” radio button when you want to apply the insert
effect to the input from an input jack.
4. Press the “ ” button located below “Select EffType” to open the
“Select Effect Type” dialog box.
5. Select the “2in2out x 2” radio button, and press the “OK” button.
“2in2out x 2” means that you can use two stereo-in/stereo-out
effects.